Yes, Lenovo laptops are reliable, however, there can be some issues that arise from time to time. A common issue is the Lenovo laptop not turning on. Don’t worry as here is the full rundown on issues with Lenovo laptops that won’t turn on and how you can solve them.
Why Is My Lenovo Laptop Not Turning On?
There are numerous reasons why your Lenovo laptop won’t turn on, the most common ones are:
- The Battery is dead.
- It overheats.
- The improper shutdown can cause a change in the registry as well as the performance of the system.
- AC adaptor issues, i.e., not providing sufficient voltage to the laptop.
- Software/hardware issues.
- BIOS issues.
- The cables are faulty. Or are not properly plugged in.
- The issues with the power button.
Identifying the cause of the problem will help you resolve it faster. If not, you will have to try different methods until one of them works. Don’t panic if your laptop won’t turn on because there is likely to be a solution.
How To Fix a Lenovo Laptop That does not Turn On?
1. Could be Overheating
It is not new news that the internal mechanics of the laptop produce a lot of heat. Excessive use is accompanied by damage to the internal hardware. Therefore, the internal thermal protection turns the laptop off.
If the laptop shuts off by itself, won’t turn on, as well as feels hot, it is likely due to overheating, if so:
Set your laptop aside, you need to make sure it is not in direct sunlight.
Don’t try to turn it on, let it cool down, to be safe, let it cool for an hour.
If the laptop has a removable battery, you should remove it.
After an hour put the battery back in (if you have taken the battery out,) then turn the laptop on.
The laptop should turn on, to prevent overheating in the future, and make sure the laptop vents properly. Make sure you don’t cover the vents while the laptop is in use.
2. Check the AC Cable/Adapter
The easy thing you can do is to inspect your AC cable/adapter/plugs to see if they are damaged, look burnt, twisted, or have dirt. If so, it is the reason they can’t provide your Lenovo laptop with sufficient power.
To test whether your AC cable is providing your laptop with enough power:
- First, plug the AC cable into the port of the laptop.
- Locate the power status indicator light, usually, it is next to the AC cable.
If it is on, it signifies the cable is working. If not, you can check the power outlet as well as the power adapter.
To check if your charger is faulty:
- Take out the laptop’s battery, if your model supports it.
- You need to remove any plugs connected to the laptop including the USB, AC adapter, etc.
- Now, hold down the Power button for around 30 seconds.
- Plug in the battery. (Leave the charger).
- Try to see if the laptop turns on.
If your computer turns on, it means the charger is faulty.
3. Possible Battery Issues
It is common for a laptop battery to lose its effectiveness or stop working as time passes. If your laptop turns on while plugged into the charger, however, it doesn’t turn on with just the battery then you need to replace the battery, to check:
- Take out the laptop’s battery, if your model supports it.
- You need to remove any plugs connected to the laptop including the USB, AC adapter, etc.
- Now, hold down the Power button for around 30 seconds.
- Plug in the charger. (Leave the battery).
- Try to turn on the laptop, if it does turn on, it means the battery is faulty.
The only solution is to have the battery serviced or you can choose to replace it. Before you perform this test, make sure the battery is charged beforehand.
4. Could be Residual Power Issues
The residual power is the leftover power from when you last turned the laptop off, it is generally stored in its capacitor. Sometimes this residual power can result in issues with the laptop turning on due to a power glitch, if so:
- Take out the laptop’s battery, if your model supports it.
- Remove any plugs connected to the laptop including USB, AC adapter, etc.
- Now, press the power button 10 times repeatedly.
- Then, press it once more, however, now hold it down for 30 seconds.
- Connect the AC adaptor to the laptop, then press the power button.
- Let the laptop load completely, after it does shut it down properly.
- Now, put the battery back in the laptop, then turn it on.
If the method does not work, try it again. If a repeated try fails as well, then move on to the next method.
Tip: You should try to use a surge protector instead of plugging your laptop directly into the wall, also consider changing your battery or your charger at this point.
5. Reset the Laptop
Lenovo provides a reset button on most of its laptop models. This reset button gives you a chance to refresh the laptop and to help resolve common issues like it not turning on. To reset the laptop:
- First, remove the battery, then disconnect the AC adaptor from the laptop.
- Then, disconnect all other devices connected to the laptop.
- Turn the laptop upside down and search for the emergency reset hole, it is a small hole. It is generally by itself on the backside.
- Use a needle to press the button.
- Then. turn the laptop around and power it on.
What if your laptop doesn’t have a dedicated reset button? You can substitute this step by pressing and holding the power button on your laptop for 60 seconds.
The reset method will fix most issues when it comes to the black screen issue as well as the laptop not turning on.
6. Use the Recovery Mode
This method is similar to the previous ones it helps if the reset didn’t work. A few Lenovo laptops have a pinhole button on the side called NOVO next to the AC cable which helps access the recovery mode.
If you can power on your laptop using this button, it signifies that there are some issues with the power button itself. So, it’s advised you contact Lenovo customer support for further assistance.
If you liked this article (or if it helped), leave a comment below or share it with friends so they can also know Lenovo Laptop won’t turn on how to fix it.
